Automation engineer interview showing a candidate discussing project experience beside PLC programming screens and a whiteboard listing hiring criteria.

Industrial Automation Hiring

Two candidates can describe the same PLC platforms, years of experience, and project types. Only one may be ready to take ownership when a startup stops following the plan.

That difference rarely appears in a list of software names. It appears when you ask a candidate to reconstruct a real project: what they personally owned, what failed, how they diagnosed it, who they coordinated with, and what condition the system was in when they handed it over.

The best automation engineer interview questions do not test whether someone memorized terminology. They create a fair way for the candidate to show how they think and a consistent way for the hiring team to evaluate evidence.

Start with the work, not a generic question list

An interview is more useful when the team has already defined the first outcome the engineer must own. Plant support, machine controls, system integration, commissioning, and standards development can require overlapping tools but very different operating judgment.

Before the interview, write one sentence that describes the moment when this person must be valuable. For example:

We need an engineer who can take a material-handling cell from completed electrical installation through I/O checkout, PLC/HMI changes, site acceptance, and customer handoff.

If that sentence is still vague, pause and clarify the role. Our guide, A Controls Engineer Job Description Is Not a Shopping List, explains how a long technology list can hide the actual job from both candidates and interviewers.

Ten automation engineer interview questions that reveal real ownership

1. Tell me about the last automated system you personally helped commission.

Ask the candidate to describe the application, project phase, control environment, team, schedule, and final result. Then clarify their individual responsibility.

Listen for: specific decisions, code or hardware the candidate personally owned, the sequence from preparation through acceptance, and a clear boundary between their work and the team’s work.

Follow-up: “If I spoke with the project manager, what would they say you were accountable for?”

2. What went wrong near startup, and how did you isolate it?

Almost every meaningful startup has surprises. Strong answers usually describe a disciplined path through symptoms, evidence, competing causes, tests, and confirmation.

Listen for: safe troubleshooting, use of drawings and diagnostics, separation of electrical, mechanical, network, logic, and process causes, and an explanation of why the final fix addressed the root problem.

Be cautious when every failure is blamed on another team or when the story jumps directly from “it did not work” to “I fixed the code” without a diagnostic sequence.

3. Describe a time the written sequence did not match the real process.

This question tests how the engineer works with incomplete or conflicting information. It is especially useful for brownfield projects, custom equipment, and late-stage commissioning.

Listen for: questions asked before making changes, coordination with operations and other disciplines, management of risk, documentation of the agreed behavior, and a controlled path from temporary workaround to approved solution.

4. How do you prepare for FAT or site startup?

A capable engineer should be able to explain preparation in terms of risk reduction, not just travel logistics.

Listen for: code and drawing review, simulation or dry-run methods, I/O and network planning, safety validation, test scripts, known-issue lists, backups, version control, spare parts, access requirements, owner decisions, and a plan for documenting changes.

The exact checklist varies by environment. What matters is whether the candidate anticipates predictable failure points before production pressure arrives.

5. Tell me about code or a system you inherited from someone else.

Automation teams rarely work only in clean, self-authored projects. This question shows whether the candidate can understand an unfamiliar system without creating unnecessary risk.

Listen for: backups, comparison to the running version, safe observation before editing, identification of conventions and dependencies, incremental changes, rollback planning, and communication with the people who operate the equipment.

6. When do you stop troubleshooting and escalate?

Independence is valuable, but experienced engineers also know when more time, authority, information, or specialized help is required.

Listen for: safety boundaries, production consequences, escalation triggers, a concise description of evidence already gathered, and the ability to ask for help without surrendering ownership.

7. How do you communicate during a high-pressure startup?

Technical ability can lose value when nobody knows what is happening, what changed, or what decision is required.

Listen for: short status updates, clear issue ownership, disciplined change notes, separation of facts from assumptions, coordination with electrical, mechanical, operations, vendors, and project management, and a habit of confirming when a problem is actually closed.

8. What does a complete handoff look like?

A startup that works only while one engineer is present is not a strong handoff.

Listen for: approved backups, as-left code, redlined or updated drawings, open-item lists, alarm and setpoint documentation, training, recovery procedures, spare-parts or access information, and a clear record of temporary conditions.

This is also an important question for contract support. A defined exit plan helps the engagement leave the internal team stronger. See when flexible automation staffing can protect a startup date.

9. Which part of the automation lifecycle is your strongest, and where do you need support?

Self-awareness is safer than a claim of equal strength in architecture, electrical design, PLC development, robotics, commissioning, project leadership, and every major platform.

Listen for: an honest specialty, adjacent skills, examples of learning, and a realistic understanding of when the candidate needs review or support.

10. What would you need to know before accepting responsibility for this work?

Give the candidate the one-sentence outcome and let them interview the project.

Listen for questions about:

  • the process, equipment, project phase, and definition of done;
  • PLC, HMI, SCADA, robot, vision, network, motion, and safety platforms;
  • drawings, standards, existing code, and documentation quality;
  • team structure, decision authority, customer contact, and vendor support;
  • travel, shifts, startup windows, schedule risk, and on-call expectations;
  • testing, validation, acceptance, training, and handoff requirements.

Experienced candidates often ask sharper questions because they understand what can turn a reasonable assignment into an unsafe or impossible one.

Use a scorecard instead of comparing impressions

Interview teams can hear the same answer and evaluate different things. A short scorecard makes the decision more consistent.

Score each category from one to five and require a sentence of evidence:

  • Relevant ownership: Has the candidate personally owned work comparable to the first outcome?
  • Troubleshooting judgment: Do they isolate problems methodically and safely?
  • Technical transfer: Can adjacent experience transfer to the actual platform and application?
  • Startup communication: Can they coordinate across disciplines under pressure?
  • Handoff discipline: Do they leave systems, documentation, and teams in a stable condition?
  • Operating fit: Are travel, schedule, environment, authority, and support expectations aligned?

Do not average away a critical gap. If the job requires independent safety work on day one, a low score there cannot be offset by strong communication. The hiring team should identify those non-negotiable categories before interviews begin.

Common interview mistakes

Testing trivia instead of judgment

A fact question may confirm familiarity, but it rarely shows how someone behaves when several plausible causes appear at once. Use technical questions to open a project discussion, then ask how the candidate applied the knowledge.

Accepting “we” without finding “I”

Automation delivery is collaborative. Candidates should credit the team. The interviewer still needs to understand which code, decisions, tests, and outcomes belonged to the candidate.

Rewarding confidence more than evidence

A polished answer is not proof. Ask for system context, sequence, diagnostics, tradeoffs, result, and handoff. Specific follow-ups help quieter candidates demonstrate capability fairly.

Hiding the difficult parts of the job

Be direct about travel, startup hours, customer pressure, legacy systems, documentation quality, and decision authority. An interview should test mutual fit, not persuade someone into an operating reality they would have declined if it were clear.

A practical 45-minute interview structure

  1. Five minutes: Explain the system, first outcome, team, schedule, and hard constraints.
  2. Twenty minutes: Trace one relevant project from assignment through handoff.
  3. Ten minutes: Explore one failure and the troubleshooting path.
  4. Five minutes: Discuss operating fit, travel, authority, and support.
  5. Five minutes: Give the candidate room to question the project.

For a broader framework on evaluating evidence from real project work, read How to Hire an Automation Engineer Who Can Actually Deliver.

The goal is a supported decision

No interview removes all hiring risk. A good process does make the evidence visible.

Define the outcome, ask candidates to reconstruct comparable work, use consistent follow-ups, and score what the job actually requires. That gives the team a better basis for deciding whether someone can own the first critical result, what support they will need, and where a strong adjacent candidate may be safer than a perfect keyword match.

Need help evaluating an automation hire?

On Mission Resources works with manufacturers, OEMs, integrators, and engineering teams to define the real requirement and identify automation talent with evidence from comparable work.

Tell us what the engineer must deliver, what is at risk, and when the work needs to begin. We can help you sharpen the interview, evaluate the market, and determine whether a permanent search, contract support, or a blended approach fits the situation.

Request available automation engineer profiles

Frequently Asked Questions

What are the best automation engineer interview questions?

Ask for one specific project and trace the candidate’s personal ownership, troubleshooting process, coordination, result, and handoff. Questions about startup failures, inherited systems, FAT preparation, escalation, and documentation usually reveal more than a platform quiz alone.

How do I verify a controls engineer’s real experience?

Ask what the candidate personally designed, programmed, tested, commissioned, decided, and documented. Request details about the system, team, constraints, diagnostic sequence, final condition, and what a project manager would say they owned.

Should I require experience with the exact PLC platform?

Require exact platform experience when the engineer must work independently and safely from day one. Otherwise, evaluate whether strong adjacent experience can transfer. Relevant ownership and troubleshooting judgment may predict success better than a keyword match.

How should an automation interview be scored?

Use a consistent scorecard for relevant ownership, troubleshooting judgment, technical transfer, communication, handoff discipline, and operating fit. Identify non-negotiable categories before the interview so a critical gap is not hidden by an average score.

Ready to Learn More? 

General Contact

related news & insights.